- +86-15153140653
- info@jnruijie.com
Model | RJ-3015PT |
Plate Working Area | 1530*3050mm |
Plate Optional Area | 1530*4050mm 2030*4050mm |
Laser Power | 1000W 1500W 2000W 3000W 4000W 6000W(Optional) |
Max Speed | 80m/min |
Max Acceleration | 0.8G |
Repeat positioning accuracy | ±0.02mm |
Voltage | AC 380V, 3-phase, 50/60Hz |
Heavy Duty Welding Lathe Bed
Lathe bed is welding by high-strength carbon structural steel, which can ensure the strength and tensile strength of the bed. It is also very beneficial to the laser cutting machine cutting speed.
Auto Focus Laser Head-Without Manual Focusing
The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.
Bigger Adjustment Range
Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.
Long Service Life
Collimating lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.
4rd Generation Aviation Aluminum Beam
It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
Compared with cast aluminum gantry, aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the running speed.
Compared with normal aviation aluminum, it adopts a honeycomb structure with 8 holes in the cross section, which greatly enhances the strength of the beam.
Double Pneumatic Chuck
It adopts pneumatic clamp design on both sides and it can modulate the center automatically. Compared with electric chuck, clamping force is easier to adjust, and the pipe is not deformed.
Dual platform rapid exchange system
Exchange time of 10 seconds, fast exchange between dual platforms, good rigidity and high precision of the gear tooth strip transmission system.
Double Roller Claw
Easily to cut thin tubes.
Larger Cutting Range: 6m length; diameter: 20-220mm, rectangular tube: 20*20mm-220*220mm.
Widely used in advertising, high pressure / low voltage electrical cabinet production, textile machinery accessories, kitchen appliances, cars, machinery, elevators, electrical accessories, spring coil pieces, metro line parts and other industries.
